Kính lúp để bàn PD-032C LED

Installation Instructions
1, Before using the product, please pay attention to whether the power supply voltage is consistent with the actual voltage.
2, When changing the direction and position of the magnifying glass, if the adjusting arm lock button is too tight, please relax alittle, and then adjust the position and direction before tightening. Never pull forcibly to avoid damaging the components.
3, After turning on the power switch, the lamp is first warmed up for about 1.5 seconds, and then the lamp is normally lit.
4, It is equipped with abnormal state protection. When an abnormal phenomenon occurs in the lamp (the lamp is open, the lamp does not start, and the lamp leaks), the electronic circuit is automatically shut down and locked until the power is turned off to
eliminate the abnormal phenomenon.
5, When the lamp is off, check whether it is caused by aging after long-term use. If so, you need to change the lamp. If the lamp does not turn on after replacing the lamp, please check whether the lamp, the lamp plug and the power plug are connected properly.

Features:
1.PD-032C magnifier with 20x magnification is a line of tabletop magnifiers, LED lights, transparent glass mirrors, 125mm diameter, commonly used in examining microcircuits, electronic component circuit boards, and phone repair.
2. Input power line 1.2 m, equipped with adjustable brightness power box.

3.The length of middle metal hose is 250mm which can adjust the magnifier angle.

4.The bottom base with a rubber in the clamping surface which can clamp 0-65mm table and not damage the desk.

5.Magnifying lamp head size: 148 * 166 mm

Product Description